Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
If the same error occurs, re-install
HDLM. For details on the view
operation, see view (Displays
Information) on page 6-25. For
details on the set operation, see
set (Sets Up the Operating
Environment) on page 6-16.
KAPL04010-E Could not open the error log file. Details
HDLM manager could not start
normally because it was unable to
open the error log file.
Action
Check whether another program is
currently using the error log file
(for example, the file is being
opened in a text editor), or
whether the error log file has been
inadvertently deleted.
KAPL04011-E Could not output the error log
file.
Details
The log information could not be
output to the error log file.
Action
Make sure that the disk has
enough unused capacity.
KAPL04012-E Could not create a
communication pipe. RC =
aa...aa
Details
HDLM manager could not start
normally because it was unable to
create a pipe file, which is used in
communication with HDLM
commands.
aa...aa: OS error code (decimal
number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL04013-E Input is impossible via the
communication pipe. RC =
aa...aa
Details
Data could not be read from the
pipe file while communicating with
an HDLM command.
aa...aa: OS error code (decimal
number)
Action
8-30
Messages
Hitachi Dynamic Link Manager (for VMware®) User Guide