Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
For any non-default options, use
the dlnkmgr set operation to set
the options again. For details on
the set operation, see set (Sets
Up the Operating Environment) on
page 6-16.
KAPL04034-E An attempt to create the option
definition file has failed.
Details
An attempt to re-create an option
definition file using the default
values has failed.
Action
Remove unnecessary files to
secure unused capacity on the file
system, or check the write
permissions for the folder and file.
KAPL04042-I HDLM SNMP TRAP information -
aa...aa
Details
All the paths that path health
checking examined are fine.
aa...aa: Start or stop.
Action
None.
KAPL04045-I HDLM SNMP TRAP was sent.
Trap ID = aa...aa, IP Address =
bb...bb, Port Number= cc...cc,
Community = dd...dd, Trap
Data = ee..ee
Details
aa...aa: Trap ID
bb...bb: Destination IP address of
the trap
cc...cc: Destination port number
of the trap
dd...dd: Community name given
to the trap
ee...ee: Transmission data
Action
None.
KAPL04053-W The option definition file was
recovered from a work file.
Details
Execute the dlnkmgr view -sys
command to check whether the
settings are recovered. If the
settings are not recovered,
execute the dlnkmgr set
operation to recover the settings.
KAPL04057-E An attempt to connect to the
VMware server failed. (VMware
server host = aa...aa)
Details
aa...aa: VMware server host IP
address
Action
If the VMware server is not
stopped, check whether a network
failure occurred.
Messages
8-33
Hitachi Dynamic Link Manager (for VMware®) User Guide