Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
bb...bb: Version number of HDLM
you attempted to install or
remove
Action
See the previous warning and
error messages to resolve the
problems.
KAPL09187-W No parameter is specified. Details
No installation-information
settings file has been specified in
the installhdlm utility for
installing HDLM.
Action
Make sure that an actual
installation-information settings
file for the installhdlm utility is
appropriate, and then try again.
KAPL09188-W Too many parameters are
specified.
Details
Multiple parameters were specified
for the installhdlm utility for
installing HDLM.
Action
Make sure that the parameters for
the installhdlm utility is
appropriate, and then try again.
For details on the installhdlm
utility, see
The installhdlm Utility
for Installing HDLM on page 7-8.
KAPL09189-W The parameter contains an
incorrect value. (Value =
aa...aa)
Details
Either -f, -v, or -h must be
specified as the first parameter for
the installhdlm utility for
installing HDLM.
-s, or -h must be specified as
parameters for the removehdlm
utility for removing HDLM.
aa...aa: Invalid parameter
(character string)
Action
Make sure that the parameters for
the installhdlm or removehdlm
utility are appropriate, and then
try again. For details on the
installhdlm utility, see
The
installhdlm Utility for Installing
HDLM on page 7-8. For details on
the removehdlm utility, see
The
removehdlm Utility for Removing
HDLM on page 7-11.
Messages
8-37
Hitachi Dynamic Link Manager (for VMware®) User Guide