Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
• Confirm that valid license
information is stored in
the license key file
specified for
licensekeyfile key.
If the problem persists, use
setup.exe to install HDLM. If
an error occurs, take action
according to the relevant
error message.
¢
remove:
Contact your HDLM vendor or
the maintenance company if
there is a maintenance
contract for HDLM.
KAPL10001 to KAPL11000
Message ID Message Text Explanation
KAPL10001-W No parameter has been
specified.
Details
No folder to which the collected
information will be output has
been specified.
Action
Check the parameters of the
DLMgetras utility for collecting
HDLM error information, and then
retry. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL10002-W Too many parameters have
been specified.
Details
Four or more parameters have
been specified.
Action
Check the parameters of the
DLMgetras utility for collecting
HDLM error information, and then
retry. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL10004-W The parameter contains an
incorrect value. Value = aa...aa
Details
The first parameter must be a
folder.
aa...aa: Invalid parameter
Messages
8-41
Hitachi Dynamic Link Manager (for VMware®) User Guide