Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
KAPL20033-E A parameter is invalid.
Parameter = "aa...aa"
Details
The parameter specified in esxcli
command (nmp satp setconfig) is
invalid.
aa...aa: Specified parameter
Action
Check the parameter you
specified. Specify the correct
parameter and retry the esxcli
command.
KAPL20034-E The device (aa...aa) is not HAM
pair.
Details
The device name specified for -d
option of esxcli command (nmp
satp setconfig --config pvolrel) is
not device (HAM pair).
aa...aa: Name of device (HAM
pair) specified for -d option
Action
Check the parameter you
specified. Specify the correct
parameter and retry the esxcli
command.
KAPL20035-E The target HAM pair (aa...aa)
has already been released.
Details
The device name(HAM pair)
specified for -d option of esxcli
command (nmp satp setconfig --
config pvolrel) was already
released.
aa...aa: Name of device (HAM
pair) specified for -d option
Action
Check the parameter you
specified. Specify the correct
parameter and retry the esxcli
command.
KAPL20036-E An attempt to release the
primary volume of HAM pair
(aa...aa) has failed.
Details
An attempt to release the primary
volume of HAM pair specified for -
d option of esxcli command (nmp
satp setconfig --config pvolrel) has
failed.
aa...aa: Name of device (HAM
pair) specified for -d option
Action
Wait a while, and then try again.
KAPL20041-W The state of path (aa...aa) was
not able to be updated.
Details
aa...aa: Name of Path that was
not able to be updated.
Messages
8-55
Hitachi Dynamic Link Manager (for VMware®) User Guide