Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL20045-W The state of path (aa...aa) was
not able to be updated. Sense
key=bb...bb ASC/ASCQ=cc...cc
Details
aa...aa: Name of Path that was
not able to be updated.
bb...bb: Sense key
cc...cc: ASC/ASCQ
Action
According to the explanation of
Sense Code, check the status of
the storage.
KAPL20050-E An error occurred in all the
paths of the device (aa...aa).
Details
A problem such as a disconnection
caused an error in the last online
path of the device.
aa...aa: Device name
Action
See "What To Do for a Path Error
on page 5-2 Actions taken for a
path error", check the status of
the device shown in the message
and all the paths of that device,
resolve the error, and then switch
the paths to online.
KAPL20051-E No path connected to the device
(aa...aa) is in the Online(D)
status.
Details
Due to path failure, path deletion,
or offline operation, no path
connected to the LU (aa...aa) is in
the Online(D) status.
aa...aa: Device name (same as
HDevName of "dlnkmgr view -
path" command)
Action
To return a path to the Online(D)
status, resolve the path failure,
and then execute the "dlnkmgr
online -dfha" command.
KAPL20902-E A parameter is invalid.
parameter = aa...aa
Details
A parameter is invalid.
aa...aa: The specified parameter
Action
Specify the -h parameter for the
utility for configuring HDLM
Messages
8-57
Hitachi Dynamic Link Manager (for VMware®) User Guide