Hitachi Dynamic Link Manager Software Users Guide for VMWare

Return
Code
Explanation
Action
Refresh the host information, and then perform the operation again.
If the same error occurs again, execute the DLMgetras utility for
collecting HDLM error information, and then contact your HDLM
vendor or maintenance company if you have a maintenance contract
for HDLM. For details on the DLMgetras utility, see
The DLMgetras
Utility for Collecting HDLM Error Information on page 7-2.
1038 Details
A storage system that cannot use the load balancing function is
connected.
Action
Check the system configuration. One or more connected storage
systems cannot use the load balancing function. The load balancing
function does not operate on the LUs of such storage systems.
1041 Details
An attempt to communicate with the HDLM manager has failed.
Action
Check whether the HDLM manager is running on the host. If it is not
running, start the HDLM manager.
1042 Details
Information about the path configuration on the specified LU does not
match the path configuration information held by HDLM.
Action
Refresh the host information, check the path status, and then
perform the operation again.
1043 Details
The specified LU is part of a storage system that cannot use the load
balancing function.
Action
Check the storage system of the LU that is connected by the specified
path.
1045 Details
A parameter is invalid.
Action
Refresh the host information, and then perform the operation again.
If the same error occurs even again, execute the DLMgetras utility for
collecting HDLM error information, and then contact your HDLM
vendor or maintenance company if you have a maintenance contract
for HDLM. For details on the DLMgetras utility, see
The DLMgetras
Utility for Collecting HDLM Error Information on page 7-2.
1046 Details
A parameter is invalid.
Action
Refresh the host information, and then perform the operation again.
If the same error occurs again, execute the DLMgetras utility for
Messages
8-63
Hitachi Dynamic Link Manager (for VMware®) User Guide