Hitachi Dynamic Link Manager Software Users Guide for VMWare

Table 2-8 Types of ESXi Host Error Information
Log name Description Output destination
Syslog Information about detected errors is
collected.
The default file path
is /var/log/vmkernel.log.
For details on how to set the
syslog file path, refer to the
VMware vSphere documentation.
For details on how to change the collection level, see Table 8-1 Format and
Meaning of the Message ID KAPLnnnnn-l on page 8-2 in Format and
Meaning of Message IDs on page 8-2.
The following table shows the error information for remote management
clients.
Table 2-9 Types of Remote Management Client Error Information
Log name Description Output destination
Integrated trace
file
This log collects operation
log data of the HDLM
command.
The default file name is
program-installation-drive:\Program
Files
#1
\HITACHI\HNTRLib2\spool
\hntr2n.log (where n is a file number)
To specify the output destination folder
and the file prefix for the integrated trace
file, use the Hitachi Network Objectplaza
Trace Library (HNTRLib2) utility.
Trace file This log collects trace
information on the HDLM
manager at a user-
specified level. If an error
occurs, you might need to
change the settings and
collect trace information.
The trace file name is
\Program Files\HITACHI
\DynamicLinkManager\log
\hdlmtr[1-64].log
#2
Error log This log collects information
about errors that occurred
while HDLM was linked with
Global Link Manager.
HDLM manager logs
\Program Files\HITACHI
\DynamicLinkManager\log
\dlmmgr[1-16].log
#2
Hitachi Command Suite Common Agent
Component logs
\Program Files\HITACHI
\DynamicLinkManager\log
\dlmwebagent[1-N].log
#2
The value N depends on the setting
in the dlmwebagent.properties file.
Event log This log collects audit log
data.
Event logs (application logs)
#1
HDLM Functions
2-25
Hitachi Dynamic Link Manager (for VMware®) User Guide