Hitachi Dynamic Link Manager Software Users Guide for VMWare

To display HDLM version information, execute the dlnkmgr command's view
operation with the -sys parameter specified. The following is an example of
executing the command:
To check the version of HDLM installed on a host:
PROMPT>dlnkmgr -s host-name -u user-name -p password view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
SATP : HTI_SATP_HDLM
Default PSP : HTI_PSP_HDLM_EXLIO
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To check the version of HDLM installed on a remote management
client:
PROMPT>dlnkmgr -l view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
The value displayed in HDLM version indicates the HDLM version.
Viewing HDLM Component Information
This section explains how to display HDLM component information.
To display HDLM component information, execute the dlnkmgr command's
view operation with the -sys parameter specified. The following shows an
example in which the command is executed:
PROMPT>dlnkmgr -l view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
4-8
HDLM Operation
Hitachi Dynamic Link Manager (for VMware®) User Guide