HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 User Guide

Refresh HostsEdit HostsItem
--
Y
1
and Y
2
IP Address
--
Y
1
User ID/PW
--
Y
3
Whether or not to use Host Data Collector
--YProtocol
Y--Port Type
Y--WWN
Legend:
• Y : Can be edited or refreshed
• -- : Cannot be edited or refreshed
•
Y
1
: IP address, user ID, and password of vMA.
•
Y
2
: You can specify IPv4 or IPv6.
•
Y
3
: A host registered by using vMA can be set to be managed by Host Data Collector, but if it
is managed by Host Data Collector, it cannot be set to be managed by vMA. If a host has been
set to be managed by Host Data Collector, see the description of how to update registered host
information by using Host Data Collector.
1. From the Administration tab, select Managed Resources.
2. On the Hosts tab, select the host to update, then click either Refresh Hosts, or Edit Hosts (specifying
required items before executing the processing).
3. Execute the processing. The task is registered to Data Collection Tasks tab. If you changed settings
in the Edit Hosts dialog box, after the task has completed successfully, execute a refresh operation
using Refresh Hosts.
The host list is updated.
Changing settings for a host registered by using Device Manager agent
When the Device Manager agent is being used, host information is automatically sent from the Device
Manager agent periodically. However, after changing settings from the Edit Hosts dialog box,
depending on the changed settings, it may be necessary to use Refresh Hosts to update host
information.
To make changes to each item, see the following table:
Refresh HostsEdit HostsItem
--
Y
1
Host Name
Y--OS Type
Y--IP Address
----User ID/PW
Y
2
Y
2
Port Type
User Guide 35