HP XP7 Continuous Access Synchronous for Mainframe Systems User Guide (TK911-96003)

Selected Remote Connection table
DescriptionItem
Connection Type
• System: system-to-system connection.
• CU: CU-to-CU connections.
Local system CU number.Local CU
Information about the remote system.Remote Storage System
• Model / Serial Number: Model and serial number.
• CU: CU number.
• SSID: SSID number. Cnt Ac-S Z only.
Cnt Ac-S only.Path Group ID
Path group identifier.
Number of remote paths including those being added.Number of Remote Paths
Minimum number of remote paths.Minimum Number of Paths
• Cnt Ac-S and Cnt Ac-S Z: Range is from 1 to 8.
• Cnt Ac-J and Cnt Ac-J Z: The minimum number is 1, regardless of the number
entered.
Time limit between 10 and 100 seconds for the data-transfer operation to
complete (15 is the default).
RIO MIH Time
Cnt Ac-S/Cnt Ac-S Z only.Roundtrip Time (msec.)
Time limit between 1 and 500 milliseconds for data copy from P-VOL to S-VOL
(1 is the default).
Cnt Ac-S Z only.FREEZE Option
Enables or disables support for the CGROUP (FREEZE/RUN) PPRC TSO
command.
Add Remote Paths wizard
Use this wizard to add remote paths to a remote connection.
Add Remote Paths window
Use this window to add remote paths to a remote connection.
For complete information and instructions, see “Configuring additional remote paths” (page 86).
150 Cnt Ac-S Z GUI reference