HP XP7 Continuous Access Synchronous for Mainframe Systems User Guide (TK911-96003)
DescriptionItem
• Pair Position: Whether volume is a P-VOL or S-VOL.
• Emulation Type: Volume’s emulation type.
• Capacity: Volume’s capacity.
• CLPR: Volume’s CLPR.
Type of pair:Copy Type
• Cnt Ac-S: Continuous Access Synchronous
• Cnt Ac-S Z: Continuous Access Synchronous Z
Pair status.Status
Cnt Ac-S only.Secondary Volume Write
Whether the S-VOL can be written to while the pair is split.
• Enable: Can write to S-VOL.
• Disable: Prevents writing to S-VOL. Default.
A hyphen displays if performing the split operation from the pair’s secondary
storage system, regardless of the selected option.
Whether the P-VOL can be written to while the pair is split.Primary Volume Write
• Depend on Primary Volume Fence Level: Writing to P-VOL depends on the
Primary Volume Fence Level Setting. Default.
• Disable: Prevents writing to the P-VOL.
A hyphen displays if performing the split operation from the pair’s secondary
storage system, regardless of the selected option.
P-VOL’s fence level setting.Fence Level
Cnt Ac-S Z only.SSB Transfer (F/M=FB)
Whether to report SSB (sense byte) to the host. Enable/Disable.
A hyphen displays if performing the split operation from the pair’s secondary
storage system, regardless of the selected option.
Information about the remote system.Remote Storage System
• Model / Serial Number: Model and serial number.
• SSID: SSID number. Cnt Ac-S Z only.
• LDEV ID: LDEV identifier.
Cnt Ac-S only.Path Group ID
Path group identifier.
Pair’s consistency group identifier.CTG ID
Whether the consistency group is shared by multiple storage systems.CTG Utilization
• Single: The consistency group consists of a single pair of primary and
secondary storage systems.
• Multi: The consistency group consists of multiple storage systems.
Cnt Ac-S Z only.Preserve Mirror Status
Preserve mirror status.
Resync Pairs wizard
Use this wizard to resynchronize pairs.
Resync Pairs wizard 171