HP XP7 Continuous Access Synchronous for Mainframe Systems User Guide (TK911-96003)

Pairs table
DescriptionItem
Information about volumes in the local storage system.Local Storage System
• LDEV ID: LDEV identifier. Clicking the link opens the LDEV Properties window.
• LDEV Name: LDEV name.
• Pair Position: Whether the volume is a primary or secondary volume.
• CLPR: Volume’s CLPR.
• Virtual storage machine: Virtual storage machine’s model type and serial
number.
• Virtual LDEV ID: Volume’s virtual LDEV identifier.
• Virtual Device Name: Volume’s vrtual device name, in the format:
virtual emulation type/number of virtual LUSE volumes/virtual CVS attribute
- Only attributes that are specified display.
- “CVS” displays at the end of the device name, if the virtual CVS attribute is
specified.
- A blank indicates no values are specified.
• Virtual SSID: Volume’s virtual SSID. A blank indicates that no virtual SSID is
specified.
Cnt Ac-S Pairs tab:Copy Type
• Cnt Ac-S: Continuous Access Synchronous
• Cnt Ac-S Z: Continuous Access Synchronous Z
Pair status.Status
For status definitions, see “Pair status definitions” (page 76)
Displays the concordance rate between the volume in the primary storage system
and the volume in the remote system. “(queuing)” displays if processing has not
started.
Synchronous Rate (%)
Information about volumes in the system connected to the system you accessed.Remote Storage System
• Model / Serial Number: Remote system’s model and serial number.
• SSID: Remote system’s SSID number. Cnt Ac-S Z only.
• LDEV ID: LDEV identifier.
• Virtual storage machine: Virtual storage machine’s model type and serial
number.
• Virtual LDEV ID: Volume’s virtual LDEV identifier.
Path group identifier. Cnt Ac-S only.Path Group ID
Updates the information.Refresh
Add SSIDs wizard
Use this wizard to add SSIDs to the remote system.
Add SSIDs window
Use this window to add SSIDs to the remote system.
For complete information and instructions, see “Adding, removing SSIDs on the secondary system”
(page 88).
184 Cnt Ac-S Z GUI reference