HP XP7 for Compatible FlashCopy Mirroring User Guide (TK940-96001)

Example 13 LISTDATA command for a pool information (summary)
LISTDATA EXTENTPOOLCONFIG VOLUME(FCF6B6) UNIT(3390) SUMMARY
When the above command is issued, the summary information of all the pools is displayed as
follows.
Example 14 A display example of LISTDATA command for a pool information (summary)
2107 STORAGE CONTROL
EXTENT POOL CONFIGURATION REPORT
STORAGE FACILITY IMAGE ID 002107.900.HTC.75.000000064561
......EXTENT POOL ID 0002 SUMMARY............
REPOSITORY FULL WARNING PERCENTAGE: 30
EXT POOL FULL WARNING PERCENTAGE: 30
EXTENT POOL STATUS
FIXED BLOCK EXT POOL: NO
REPOSITORY CONFIGURED: YES
EXTENT POOL AT WARNING PERCENTAGE: NO
EXTENT POOL FULL: NO
Table 55 LISTDATA command for pool information summary
ContentsCategory
The value after subtracting the warning value of threshold value defined by
the user in the pool window in Remote Web Console from 100 (Displays
"30" when the setting value is "70").
-REPOSITORY FULL
WARNING PERCENTAGE
The value after subtracting the warning value of threshold value defined by
the user in the pool window in Remote Web Console from 100 (Displays
-EXT POOL FULL WARNING
PERCENTAGE
"30" when the setting value is "70"). Here displays the same value as in the
REPOSITORY FULL WARNING PERCENTAGE.
The fixed block pool is always displayed as NO for HP.NO
(fixed)
FIXED BLOCK EXT POOL
YES is always displayed for HP.YES
(fixed)
REPOSITORY CONFIGURED
The value has reached the warning value of threshold value defined by the
user in the pool window in Remote Web Console.
YESEXTENT POOL AT
WARNING PERCENTAGE
The value does not reach the warning value of threshold value defined by
the user in the pool window in Remote Web Console. Alternatively, the pool
NO
usage becomes full after reaching the warning value of threshold value
defined by the user in the pool window in Remote Web Console.
The pool usage amount is full.YESEXTENT POOL FULL
The pool usage amount is not fullNO
REPOSITORY and EXT POOL are used for the same meaning as a pool.
Example 15 LISTDATA command for detailed pool information
LISTDATA EXTENTPOOLCONFIG VOLUME(FCF6B6) UNIT(3390)
EXTENTPOOLID(0)
When issuing above command, the pool information of specified pool ID is displayed as follows.
The meanings of items are shown in the next table.
100 Performing Compatible FlashCopy SE operations