HP XP7 for Compatible FlashCopy Mirroring User Guide (TK940-96001)

Table 38 Information displayed by the FLASHCPY QUERY command (continued)
MeaningDisplayed contentDisplayed item
The specified volume can be specified as the S-VOL of Compatible FlashCopy.SRC CAPCAPABILITY
The specified volume can be specified as the T-VOL of Compatible FlashCopy.TGT CAP
The specified volume cannot be specified as the S-VOL or T-VOL of Compatible
FlashCopy.
NEITHER
The specified volume is the copy source volume of Continuous Access
Synchronous Z.
PPRCOPY PRI
The specified volume is the copy target volume of Continuous Access
Synchronous Z.
PPRCOPY SEC
The specified volume is the copy source volume of the Concurrent Copy.CC SRC
The specified volume cannot be used by Compatible FlashCopy.INHIBIT
The maximum number of relationships that can be created in the specified
volume is already created.
MAX EXCD
A Version 1 relationship exists in the specified volume.PHASE 1
Cannot access the specified volume.INACCESS
The previous example displays the description of "ASY PVOL" in the "CAPABILITY LEGEND", but
HP XP7 Storage does not support the program product corresponding to this item. Therefore, even
if the FLASHCPY QUERY command is executed on the Compatible FlashCopy relationship, the
"ASY PVOL" will not be displayed in the "CAPABILITY".
Displaying information about Compatible FlashCopy relationships: FLASHCPY QUERY RELATIONS
To view information about all relationships in a specified volume, execute the ICKDSF FLASHCPY
QUERY RELATIONS command. See the following example.
FLASHCPY QUERY RELATIONS UNIT(X'7001')
The following is an example of information that is displayed by executing the FLASHCPY QUERY
RELATIONS command.
Figure 28 FLASHCPY QUERY RELATIONS command execution result
68 Performing Compatible FlashCopy operations