HP XP7 for Compatible FlashCopy Mirroring User Guide (TK940-96001)

Table 40 Parameters for the ICKDSF command (REQUEST=FCQUERY)
DescriptionValueParameter
Specifies the number (device address) of the device on which you want to
perform the FCQUERY command.
Device numberDEVN
Specifies the length of data obtained with QRYINFO.Data lengthQRYSIZE
Obtains QUERY information with the format using the ANTFQMAP macro. For
details about the format, see the IBM manual.
FQMAPFORMAT
Obtains QUERY information with the format not using the ANTFQMAP macro
command. NO is the default setting.
NO
Obtains information such as pair volume attributes of Compatible FlashCopy
relationships and the number of relationships. For details about the information,
see the IBM manual.
QUERY Information
(Return Value)
QRYINFO
Obtains the return code and the reason code of the execution results. For details
about the codes, see the IBM manual.
Return valueRETINFO
You use the Remote FlashCopy function to establish a relationship.YESREMOTE
You do not use the Remote FlashCopy function.NO
NO is the default setting.
Specifies the device number of the S-VOL which you want to perform the
FCQUERY command.
Device numberQRYSERIAL
Use this parameter when REMOTE is YES.
Specifies the CU number of the S-VOL which you want to perform the FCQUERY
command.
CU numberQRYLSS
Use this parameter when REMOTE is YES.
Specifies the SSID of the CU on which you establish the FlashCopy relationship.SSIDQRYSSID
Use this parameter when REMOTE is YES.
Using z/VM CP to view relationship states for Compatible FlashCopy
You can use the z/VM CP QUERY VIRTUAL FLASHCOPY command to view information about
a Compatible FlashCopy relationship.
The available parameters are shown in the following table:
Table 41 Parameters for the QUERY VIRTUAL FLASHCOPY command
DescriptionParameter
Displays information about all the virtual devices. If no parameter is specified, ALL is the default.ALL
Only displays information about the specified virtual device.vdev
Displays information about the virtual devices in the specified range.vdev1-vdev2
A usage example of the QUERY VIRTUAL FLASHCOPY command is shown below.
QUERY VIRTUAL FLASHCOPY
VDEVN SSID LSS UA CU SERIAL ACTIVE
MAX PPRC
0010 0132 02 00 2107 000000048151 1 50099
0020 0132 02 01 2107 000000048151 1 50099
Viewing relationship states of Compatible FlashCopy 71