8.14.01 HP Utility Meter User's Guide (June 2009)

3. Install the Utility Meter software. For information about this installation, see Installing the Utility Meter
Software. Note that a reboot of the Utility Meter system and verification of the Utility Meter processes
and services are required.
4. Configure the Utility Meter software parameters by using the Utility Meter application GUI. For more
information about the Utility Meter configuration, see Configuring the Utility Meter Parameters.
5. If there are Utility Ready Storage (URS) XP devices that need to be metered, install a supported version
of the HP StorageWorks XP Command View Advanced Edition Command Line Interface (CLI) software.
For more information about this type of installation, see URS XP Only – Installing the XP CVAE CLI
Software.
6. If there are Utility Ready Storage (URS) EVA devices that need to be metered, install a supported version
of the HP StorageWorks Storage System Scripting Utility (SSSU) software. For more information about
this type of installation, see URS EVA Only – Installing the CV EVA SSSU Software.
7. If there are URS XP or EVA devices that need to be metered by the Utility Meter, configure the devices
in the Utility Meter GUI. For more information about this type of configuration, see Utility Meter Devices
Tasks.
8. If there are URS SAN switch devices that need to be metered by the Utility Meter, configure the devices
in the Utility Meter GUI. For more information about this type of configuration, see Utility Meter Devices
Tasks.
9. If there are Pay per use (PPU) server partitions that need to be metered by the Utility Meter, configure
every PPU partition by adding the partitions as a PPU WBEM Partition/Server in the Utility Meter GUI
or configure the partitions with the appropriate PPU Agent software command. For more information
about configuring partitions with PPU Agent software, see Related Documentation for a link to the PPU
User's Guide .
10. Verify the Utility Meter operation (see Chapter 4: “Verifying Utility Meter Operation”).
2.2 Skills Required
The Utility Meter software installation and configuration requires the following skills:
• HP-UX operating system concepts, commands, and configuration
• PPU Agent software commands and configuration (for PPU installations that use PPU Agent software)
• CIM commands such as cimserver and cimprovider (for PPU installations that use PPU WBEM
Partition/Server)
• Disk array configuration and Command View product experience (for URS installations)
• Experience with SAN switches of the “Director” class from HP/Brocade and Cisco and the Brocade
SMI-S Agent software (for SAN switch metering)
• sendmail experience and understanding of detailed information in the appropriate (HP–UX 11i v2,
or 11i v3) HP-UX Mailing Services Administrator's Guide at: http://docs.hp.com.
2.3 Before Going to the Customer Site
For the initial Utility Meter installation and configuration, make sure you have the following items before
going to the customer site:
• The Utility Meter Site Preparation Form must have all values filled out. For details, see Appendix A “Site
Preparation Form for Pay Per Use” or Appendix B “Site Preparation Form for Utility Ready Storage”.
The Site Preparation Form contains the networking details and Utility Meter information you need to
complete the Utility Meter installation. You must work with the customer to complete this preparation
form.
26 Installing and Configuring the Utility Meter Software