8.14.01 HP Utility Meter User's Guide (June 2009)

# cimserver enableHttps
# cimserver enable
6. Copy the certificate to meter:
/opt/wbem/sbin/ssltrustmgr –a –f /var/opt/meter/sandevices.pem –c <cert.pem>
Follow this procedure to add a SAN Switch into the Utility Meter:
1. Start the Utility Meter GUI. For details, see Starting the Utility Meter GUI.
2. In the Utility Meter GUI, click the Devices tab.
3. In the Utility Meter GUI Tasks (right) pane, click the Add Device button.
The Utility Meter GUI displays the Add Device dialog box.
Figure 3-13 Add Device Dialog Box for a Cisco SAN Switch
4. In the Add Device dialog box's Device Type drop-down list, select the SAN Switch item.
5. In the Add Device dialog box, enter values into the following fields:
• IP – Enter the IP address of the SAN Switch.
• Info – (Optional) Enter a description for the SAN Switch.
60 Performing Utility Meter Tasks