8.14.01 HP Utility Meter User's Guide (June 2009)

NOTE: If an error occurs with the requested changes, the dialog box remains open and the Status
window displays the error message.
3.5.2.4 Change HP/Brocade Switch Configuration Parameters
This task allows you to change HP/Brocade switch configuration parameters. Follow this procedure to change
one or more HP/Brocade switch configuration parameters:
1. Start the Utility Meter GUI. For details, see Starting the Utility Meter GUI.
2. In the Utility Meter GUI, click the Devices tab.
3. In the Managed Devices Tree, select the IP/Hostname of the SMI-S Agent that you want to modify.
4. In the Utility Meter GUI Tasks (right) pane, click the Modify Device button.
The Utility Meter GUI displays the Modify Device dialog box.
Figure 3-18 Modify HP/Brocade Switch Dialog Box
5. The HP/Brocade Switches row lists switches that can be metered. To enable metering on a switch,
click in the check box located in the Metered column next to the switch(s) you want to meter. Switches
that are being metered will have a check mark in their check box.
To disable metering on a switch, click in the check box to remove the check mark.
You can also modify other fields for the SMI-S device in this dialog box.
66 Performing Utility Meter Tasks