HP-UX 11i v3 HP PCI-X 2-port 4X Fabric (HPC/DB) Adapter Release Notes HP Fabric for InfiniBand B.11.31.
© Copyright 2004-2007 Hewlett-Packard Development Company L.P Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Table of Contents 1 HP PCI-X 2-port 4X Fabric (HPC) Adapter...................................................................5 What's New.............................................................................................................................................5 Known Problems and Issues..................................................................................................................5 OLD Following Use ofolrad -f Requires Manual Check........................................
1 HP PCI-X 2-port 4X Fabric (HPC) Adapter This Release Note alerts users to updates in the Administration Guide What's New Changes to InfiniBand and IPoIB Major changes to InfiniBand and IPoIB for the HP—UX 11i v3 Release consist of added support for the following: • nwmgr — IPoIB — RDMA For more details, see the man pages for nwmgr(1M), nwmgr_ipoib(1M), and nwmgr_rdma(1M). • System Management Homepage (SMH) — IPoIB — RDMA For more details, see the man page for smh(1M).
NOTE: The sequence described below applies to HP switches 376227–B21 and AB399A only. HP requires all switches in the fabric to use the same firmware image version such as: HP-374305-001-Release-2.5.0hp-build018.img Use the latest software and switch firmware available online at: http://support.hp.com . 1. 2. 3. Select Software and Driver downloads. Enter your product name. Click the double arrow.