HP Photosmart 430 series digital camera with HP instant share - (English) User Manual

64 hp photosmart 430 series user’s manual
Problem Possible cause Solution
The camera
does not turn
on.
(continued)
The HP AC
adapter is not
correctly
connected to
the camera, or
is not plugged
into a power
outlet.
Ensure that the HP AC power
adapter is:
z connected to the power adapter
connector of the camera (see
page 11)
z plugged into a working electrical
outlet.
The HP AC
power adapter
is not
functioning
correctly.
Ensure that the HP AC adapter is
not damaged or defective and is
plugged into a working electrical
outlet.
The memory
card is
defective or
contains
corrupt images.
Remove the memory card.
I replace the
camera
batteries
frequently.
The NiMH
batteries you
are using were
recharged
incorrectly, or
have drained
on their own
because they
have not been
used lately.
When NiMH batteries are brand
new or have drained from lack of
use, they should be charged and
fully drained 3-4 times to reach
optimum capacity. Also, NiMH
batteries discharge on their own
when not in use and when not
installed in the camera. So if you
have not used them in a week or
more, they may benefit from
being charged.