H3C SECBLADESSLVPN-CMW340-E7111 - Release Notes

H3C SECBLADESSLVPN-CMW340-E7111 Release Notes
April 28, 2011 Page 16 of 49
Connecting the console interface to a configuration terminal (usually a PC)
Plug the DB-9 connector of the console cable into the serial interface on the PC and the RJ-45
connector into the console interface on the SecBlade card.
Setting HyperTerminal parameters
The following describes how to set HyperTerminal parameters on the PC running Windows XP:
Step1 Select Start > Programs/All Programs > Accessories > Communications > HyperTerminal to
establish a HyperTerminal connection.
Step2 In the Connection Description dialog box, enter a name for the connection and click OK, as shown
in Figure 2.
Figure 2 Establish a HyperTerminal connection.
Step3 From the Connect using dropdown list shown in Figure 3, select the serial interface to which the
console cable is connected.