H3C SECBLADESSLVPN-CMW340-E7111 - Release Notes

H3C SECBLADESSLVPN-CMW340-E7111 Release Notes
April 28, 2011 Page 21 of 49
and you need to restart the card to enter the correct password.) After you type the correct BootWare
password, the current operating device and the main menu are displayed. On the main menu, you
can select 9 to choose a storage device.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==================<EXTEND-BootWare MENU>=====================
| <1> Boot System |
| <2> Enter Serial SubMenu |
| <3> Enter Ethernet SubMenu |
| <4> File Control |
| <5> Modify BootWare Password |
| <6> Skip Current System Configuration |
| <7> BootWare Operation Menu |
| <8> Clear Super Password |
| <9> Storage Device Operation |
| <0> Reboot |
=============================================================
Enter your choice(0-9):
The main menu is described in Table 10.
Table 10 Main menu
Menu item Description
<1> Boot System Boot an application from the CF card.
<2> Enter Serial SubMenu
Enter the serial submenu.
For details, refer to “Serial Submenu” on page 22.
<3> Enter Ethernet
SubMenu
Enter the Ethernet submenu.
For details, refer to “Ethernet Submenu” on page 23.
<4> File Control
Enter the file control submenu.
For details, refer to “File Control Submenu” on page 23.
<5> Modify BootWare
Password
Modify the BootWare password.
<6> Skip Current System
Configuration
Ignore the current system configuration.
The operation is one-off valid for the current boot. If you
want the SecBlade card to ignore the current
configuration at the next boot, you need to perform this
operation.
<7> BootWare Operation
Menu
Enter the BootWare operation submenu.
For details, refer to “BootWare Operation Submenu” on
page 24.