H3C SECBLADESSLVPN-CMW340-E7111 - Release Notes

H3C SECBLADESSLVPN-CMW340-E7111 Release Notes
April 28, 2011 Page 22 of 49
Menu item Description
<8> Clear Super
Password
Clear the super user password.
The super user password is required in user level
switching.
By default, no super user password is set.
The setting is valid only for the first reboot of the
SecBlade card and the super user password will be
restored next time the SecBlade card reboots.
<9> Storage Device
Operation
Enter the storage device operation submenu to select
applications from a storage device to boot the
SecBlade card.
<0> Reboot Reboot the SecBlade card.
Serial Submenu
Select 2 on the main menu to enter the serial submenu, where you can upgrade applications using
Xmodem. The serial submenu is as follows:
======================<SERIAL SUB-MENU>======================
|Note:the operating device is cfa0 |
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Update Backup Application File |
| <4> Update Secure Application File |
| <5> Modify Serial Interface Parameter |
| <0> Exit To Main Menu |
=============================================================
Enter your choice(0-5):
Table 11 describes the serial submenu items.
Table 11 Serial submenu
Submenu item Description
<1> Download Application
Program To SDRAM And Run
Download an application to the SDRAM through
the serial interface and run the application.
<2> Update Main Application File Upgrade the main application file.
<3> Update Backup Application
File
Upgrade the backup application file.
<4> Update Secure Application
File
Upgrade the secure application file.
<5> Modify Serial Interface
Parameter
Modify the serial interface parameters.
<0> Exit To Main Menu Return to the main menu.