H3C SECBLADESSLVPN-CMW340-E7111 - Release Notes

H3C SECBLADESSLVPN-CMW340-E7111 Release Notes
April 28, 2011 Page 46 of 49
l After you set a new user password, use the save command to save the password.
l You are recommended to save the new user password in the default configuration file.
BootWare Password Loss
Contact your local dealer if you forget the BootWare password of the SecBlade card.
You can modify the BootWare password on the main menu.
Step1 Select 5 on the main menu to modify the BootWare password as prompted.
The following information is displayed:
please input old password:
Step2 Enter the old BootWare password:
please input old password: ******
l If you enter the old BootWare password incorrectly, “Wrong password, Please input password
again:” appears.
l After three attempts to enter the correct old BootWare password, “Wrong password, system halt.”
appears and the SecBlade card halts.
Step3 Enter a new BootWare password twice at the prompt.
Please input new password: ******
Please input new password again: ******
If the following information appears, the BootWare password is successfully modified.
Password Set Successfully.
Super Password Loss
The super password enables you to switch between four super levels. If you forget the super
password, you are unable to perform higher level operations.
Follow these steps to bypass the super password:
Step1 Select 8 on the main menu to clear the super password.
==================<EXTEND-BOOTWARE MENU>=====================