H3C SECBLADESSLVPN-CMW340-E7111 - Release Notes

H3C SECBLADESSLVPN-CMW340-E7111 Release Notes
April 28, 2011 Page 47 of 49
| <1> Boot System |
| <2> Enter Serial SubMenu |
| <3> Enter Ethernet SubMenu |
| <4> File Control |
| <5> Modify BootWare Password |
| <6> Skip Current System Configuration |
| <7> BootWare Operation Menu |
| <8> Clear Super Password |
| <9> Storage Device Operation |
| <0> Reboot |
=============================================================
Enter your choice(0-9):8
If the following information appears, the super password is successfully cleared.
Clear Application Password Success
Step2 Exit from the main menu and reboot the SecBlade card to directly enter the system view.
This setting works only once. The super password will be restored when the SecBlade card is
rebooted for a second time.
Backing Up and Restoring the BootWare Program File
Select 7 on the main menu to enter the BootWare operation submenu. For details, refer to “BootWare
Operation Submenu” on page 24.
Backing Up the Entire BootWare Program File
Backing up the entire BootWare program file on the BootWare menu
To back up the entire BootWare program file, you need to first back up the basic segment and then
the extended segment as follows:
Step1 Select 1 on the BootWare operation submenu. The following information is displayed:
Will you backup the Basic BootWare? [Y/N]
Step2 Enter Y.
Begin to backup the Basic BootWare....................
Done!
By now, the basic segment has been backed up.
Then, the following information is displayed: