HP Switch Services Modules - H3C SecBladeII-CMW520-F3171P11 Release Notes

H3C SecBladeII-CMW520-F3171P11
Release Notes
Hangzhou H3C Technologies Co., Ltd.
17
Table 9 Hardware compatibility
Firewall card Network device
LSWM1FW10 H3C S5800 Switch Series
LSQ1FWBSC0 H3C S7500E Switch Series
LSB1FW2A0 H3C S9500 Switch Series
LSR1FW2A1 H3C S9500E Switch Series
LST1FW2A1 H3C S12500 Routing Switch Series
SPE-FWM
H3C SR6600 Router Series
SPE-FWM-200
IM-FW
H3C SR8800 10G Core Routers
IM-FW-II
CR-IM-FW1A H3C CR16000 Router Series
NOTE:
The following example was created and verified on the firewall card LSQ1FWBSC0 that is
installed on an S7506E switch.
System software types
The firewall card system software includes BootWare image, system software images, and
configuration files.
This chapter describes how to upgrade the system software images and configuration files.
BootWare images
The BootWare image comprises a basic section and an extended section. The basic
section is the minimum code that bootstraps the system. The extended section enables
hardware initialization and provides system management menus. You can use these
menus to load software and the startup configuration file or manage files when the firewall
card cannot correctly start up.
NOTE:
Generally, there is no need to upgrade
the BootWare program independently. The firewall
card uses the shipped BootWare program.
System software images
System software images are used at startup. The firewall card supports three types of
system software images: