HP Switch Services Modules - H3C SecBladeII-CMW520-F3171P11 Release Notes

H3C SecBladeII-CMW520-F3171P11

Release Notes

Hangzhou H3C Technologies Co., Ltd.

TFTP: 19790016 bytes sent in 38 second(s).

File uploaded successfully.

4. Perform the tftp put command in user view to upload the startup.cfg file and

system.xml file to the TFTP server.

<Sysname> tftp 192.168.0.2 put startup.cfg

File will be transferred in binary mode

Sending file to remote TFTP server. Please wait... \

TFTP: 1301 bytes sent in 0 second(s).

File uploaded successfully.

<Sysname> tftp 192.168.0.2 put system.xml

File will be transferred in binary mode

Sending file to remote TFTP server. Please wait... |

TFTP: 10324 bytes sent in 0 second(s).

File uploaded successfully.

Upgrading the system software

This configuration example was created and verified on Release 3166P13 for the system

software image file fw_card.bin.

1. Perform the tftp get command in user view to download the system software image

file, for example, fw_card.bin, to the CF card on the firewall card.

<Sysname> tftp 192.168.0.2 get fw_card.bin

File will be transferred in binary mode

Downloading file from remote TFTP server, please wait...\

TFTP: 19790016 bytes received in 89 second(s)

File downloaded successfully.

2. Perform the boot-loader command in user view to load the file fw_card.bin and

specify the file as the main image file at the next reboot.

<Sysname> boot-loader file fw_card.bin main

This command will set the boot file. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on sl

ot 0!

3. Perform the display boot-loader command in user view to verify that the file has been

loaded.

<Sysname> display boot-loader

The boot file used this time:cfa0:/main.bin attribute: main