HP Switch Services Modules - H3C SecBladeII-CMW520-F3171P11 Release Notes

H3C SecBladeII-CMW520-F3171P11

Release Notes

Hangzhou H3C Technologies Co., Ltd.

The boot file used next time:cfa0:/fw_card.bin attribute: main

Failed to get the backup boot file used next time!

Failed to get the secure boot file used next time!

4. Perform the reboot command in user view to reboot the firewall card.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

System start booting...

…

5. After the reboot is complete, perform the display version command to verify that the

system software image is correct.

<Sysname> display version

H3C Comware Platform Software

Comware Software, Version 5.20, Release 3166P13

H3C SecBlade FW uptime is 0 week, 0 day, 1 hour, 30 minutes

CPU type: RMI XLR732 1000MHz CPU

2048M bytes DDR2 SDRAM Memory

4M bytes Flash Memory

247M bytes CF0 Card

PCB Version:Ver.A

Logic Version: 3.0

Basic BootWare Version: 1.28

Extend BootWare Version: 1.38

[FIXED PORT] CON (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/2 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/3 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/4 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] XGE0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

Using FTP to upgrade software

This section describes how to upgrade system software by using FTP.

Backing up the running system software image and configuration files

1. Perform the save command in any view to save the current configuration.

<Sysname> save

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[cfa0:/startup.cfg]