HP Switch Services Modules - H3C SecBladeII-CMW520-F3171P11 Release Notes

H3C SecBladeII-CMW520-F3171P11

Release Notes

Hangzhou H3C Technologies Co., Ltd.

5. Perform the put command in FTP client view to upload the startup.cfg file and the

system.xml file to the FTP server.

[ftp] put startup.cfg

227 Entering passive mode (192,168,0,2,26,3)

125 Using existing data connection

226 Closing data connection; File transfer successful.

FTP: 1301 byte(s) sent in 0.187 second(s), 6.00Kbyte(s)/sec.

[ftp] put system.xml

227 Entering passive mode (192,168,0,2,26,6)

125 Using existing data connection

226 Closing data connection; File transfer successful.

FTP: 10324 byte(s) sent in 0.203 second(s), 50.00Kbyte(s)/sec.

[ftp]

Upgrading the system software

This configuration example was created and verified on Release 3166P13 for the system

software image file fw_card.bin.

1. Perform the get command in FTP client view to download the system software image

file fw_card.bin to the CF card on the firewall card.

[ftp] get fw_card.bin

227 Entering passive mode (192,168,0,2,26,77)

125 Using existing data connection

226 Closing data connection; File transfer successful.

FTP: 19790016 byte(s) received in 88.243 second(s), 224.00K byte(s)/sec.

[ftp]

2. Perform the quit command in FTP client view to return to user view.

[ftp] quit

221 Service closing control connection

3. Perform the boot-loader command in user view to load the file fw_card.bin and

specify the file as the main image file at the next reboot.

<Sysname> boot-loader file fw_card.bin main

This command will set the boot file. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on sl

ot 0!

4. Perform the display boot-loader command in user view to verify that the file has been

loaded.

<Sysname> display boot-loader

The boot file used this time:cfa0:/main.bin attribute: main