HP Switch Services Modules - H3C SecBladeII-CMW520-F3171P11 Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

H3C SecBladeII-CMW520-F3171P11

Release Notes

Hangzhou H3C Technologies Co., Ltd.

Item Description

<5> Modify BootWare Password Modify the BootWare password.

<6> Skip Current System

Configuration

Start the firewall card with the factory default

configuration. This is a one-time operation and does not

take effect at the next reboot. You use this option when

you forget the console login password.

<7> BootWare Operation Menu

Access the BootWare Operation menu for backing up,

restoring, or upgrading BootWare.

<8> Clear Super Password

Clear all super passwords used for switching to higher user

privilege levels.

By default, no super password is required for switching to a

higher user privilege level.

<9> Storage Device Operation

Access the Storage Device Operation menu to manage

storage devices.

<0> Reboot Restart the firewall card.

Using TFTP/FTP to upgrade software through an Ethernet

port

1. Enter 3 in the BootWare menu to access the Ethernet submenu.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is cfa0 |

|<1> Download Application Program To SDRAM And Run |

|<2> Update Main Application File |

|<3> Update Backup Application File |

|<4> Update Secure Application File |

|<5> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

|<Ensure The Parameter Be Modified Before Downloading!> |

============================================================================

Enter your choice(0-5):

Table 13 Ethernet submenu options

Item Description

<1> Download Application Program To SDRAM

And Run

Download a system software image to the

SDRAM and run the image.

<2> Update Main Application File Upgrade the main system software image.

<3> Update Backup Application File Upgrade the backup system software image.

<4> Update Secure Application File Upgrade the secure system software image.

<5> Modify Ethernet Parameter Modify network settings.

<0> Exit To Main Menu Return to the BootWare menu.

2. Enter 5 to configure the network settings.