Manualshelf

HP Switch Services Modules - H3C SecBladeII-CMW520-F3171P11 Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
31323334353637383940
H3C SecBladeII-CMW520-F3171P11
Release Notes
Hangzhou H3C Technologies Co., Ltd.
31
Updating File cfa0:/main.bin...............................................
....................................................Done!
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5):
When you enter a number in the range of 1 to 4 and the system detects that a file with
the same name exists on the firewall card, the system gives you a message and asks
you whether to overwrite the existing file.
¡ Enter Y, and the file is updated.
¡ Enter N, and the existing file is not changed. The upgrading fails.
4. Enter 0 to return to the BootWare menu, and then enter 1 to boot the system.
Using XMODEM to upgrade software through the
console port
1. Enter 2 in the BootWare menu to access the Serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5):
Table 15 Serial submenu options
Item Description
<1> Download Application Program To SDRAM
And Run
Download an application to SDRAM through
the serial port and run the program.
<2> Update Main Application File Upgrade the main system software image.
<3> Update Backup Application File Upgrade the backup system software image.
<4> Update Secure Application File Upgrade the secure system software image.