HP VPN Firewall Appliances Network Management Configuration Guide
79
− Select the Manual option.
− Select 1 from the Instance ID list.
− Set the VLAN ID to 10.
− Click Apply to map MSTI 1 to VLAN 10.
− Select 3 from the Instance ID list.
− Set the VLAN ID to 30.
− Click Apply to map MSTI 3 to VLAN 30.
− Select 4 from the Instance ID list.
− Set the VLAN ID to 40.
− Click Apply to map MSTI 4 to VLAN 40.
− Click Activate.
Figure 51 Configuring an MST region on Device A
2. Enable MSTP globally and configure the current device as the root bridge of MSTI 1:
a. From the navigation tree, select Network > MSTP > Global.
b. Perform the following configurations on the page shown in Figure 52:
− Sel
ect Enable in the Enable STP Globall
y list.
− Select MSTP from the Mode list.
− Select the Instance box.
− Set the Instance ID field to 1.
− Set the Root Type field to Primary.
c. Click Apply.