HP VPN Firewall Appliances Network Management Configuration Guide

113
Ste
p
Command Remarks
4. Configure local or
remote AAA
authentication.
For local AAA authentication, the
username and password of the peer must
be configured on the authenticator.
For remote AAA authentication, the
username and password of the peer must
be configured on the remote AAA server.
For more information about AAA
authentication, see Access Control
Configuration Guide.
The username and
password configured for
the peer must be the same
as those configured on the
peer.
2. Configuring the peer
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Configure the PAP username and
password sent from the peer to the
authenticator for PAP
authentication.
ppp pap local-user
username
password
{
cipher
|
simple
}
password
By default, the peer sends blank
username and password to the
authenticator for PAP
authentication.
Configuring CHAP authentication
According to whether the authenticator is configured with a username or not, the configuration of CHAP
authentication includes the following two types:
• Configuring CHAP authentication when the authenticator name is configured
To configure the authenticator:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Configure the local
device to authenticate
the peer by using
CHAP.
ppp authentication-mode chap
[ [
call-in
]
domain
isp-name ]
By default, PPP authentication is
disabled.
4. Assign a username to
the CHAP
authenticator.
ppp chap user
username
The username you assign to the
authenticator must be the same
as the local username you assign
to the authenticator on the peer.