HP VPN Firewall Appliances Network Management Configuration Guide

114
Ste
p
Command Remarks
5. Configure local or
remote AAA
authentication.
For local AAA authentication, the
username and password of the peer
must be configured on the
authenticator.
For remote AAA authentication, the
username and password of the peer
must be configured on the remote
AAA server.
For more information about AAA
authentication, see Access Control
Configuration Guide.
The username configured for the
peer must be the same as that
configured on the peer.
The passwords configured for the
authenticator and peer must be
the same.
To configure the peer:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number
N/A
3. Assign a username to
the CHAP peer.
ppp chap user username
The username you assign to the
peer here must be the same as
the local username you assign to
the peer on the authenticator.
4. Configure local or
remote AAA
authentication.
For local AAA authentication, the
username and password of the peer
must be configured on the authenticator.
For remote AAA authentication, the
username and password of the peer
must be configured on the remote AAA
server.
For more information about AAA
authentication, see Access Control
Configuration Guide.
The username configured here
must be the same as that
configured on the authenticator.
The passwords configured for
the authenticator and peer must
be the same.
• Configuring CHAP authentication when no authenticator name is configured
To configure the authenticator:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface
interface-type
interface-number
N/A
3. Configure the local device
to authenticate the peer by
using CHAP.
ppp authentication-mode chap
[ [
call-in
]
domain
isp-name ]
By default, PPP
authentication is disabled.