HP VPN Firewall Appliances Network Management Configuration Guide

125
Dialer interfaces created by selecting Device Management > Interface Management can be
displayed, modified, and removed in the PPPoE client page. However, they cannot establish
PPPoE client sessions.
Figure 63 PPPoE client information
2. Click Add to enter the page for creating a PPPoE client.
Figure 64 Creating a PPPoE client
3. Configure the PPPoE client information, as described in Table 16.
4. Click Apply.
Table 16 Configuration items
Task Remarks
Dialer Interface Configure the number of the dialer interface.
Username
Configure the username and password used by the PPPoE client in authentication.
The username and password must be configured together, or not configured at all.
Password