HP VPN Firewall Appliances Network Management Configuration Guide

128
PPPoE client configuration example
Network requirements
Configure the PPPoE client on the device, and enable the PPPoE client to communicate with the PPPoE
server, as shown in Figure 67.
Figure 67 Network diagram
Configuring the PPPoE client
1. Create a PPPoE client:
a. Select Network > PPPoE > Client from the navigation tree.
b. Click Add.
c. Enter 1 for the dialer interface name, user1 for the username, and password1 for the password.
Select the IP configuration mode PPP negotiate, security zone Trust (this configuration item
varies with the network environment), bound interface GigabitEthernet 0/1, and session type
Always Online.
d. Click Apply.
Figure 68 Creating a PPPoE client
2. Configure the PPPoE server: