HP VPN Firewall Appliances Network Management Configuration Guide

133
[Firewall-Dialer1] quit
[Firewall] local-user user1
[Firewall-luser-user1] password simple hello
[Firewall-luser-user1] quit
# Configure the PPPoE session.
[Firewall] interface gigabitethernet 0/1
[Firewall-GigabitEthernet0/1] pppoe-client dial-bundle-number 1
Configuration example for connecting a LAN to the Internet
using an ADSL modem
Network requirements
As shown in Figure 72:
• Firewall provides Internet access for Host A, Host B, and Host C. It connects to DSLAM through an
ADSL modem and a permanent PPPoE session.
• The username and password of the ADSL account are user1 and 123456 .
• Firewall operates as a PPPoE client, allowing the hosts in the LAN to access the Internet without
PPPoE client software.
• Router operates as the PPPoE server. It is connected to the DSLAM through interface ATM 1/0 and
performs RADIUS authentication and accounting.
Figure 72 Network diagram
Configuration procedure
1. Configure Firewall as a PPPoE client:
# Configure a dialer interface.
<Firewall> system-view
[Firewall] dialer-rule 1 ip permit
[Firewall] interface dialer 1
[Firewall-Dialer1] dialer-group 1
[Firewall-Dialer1] dialer bundle 1