HP VPN Firewall Appliances Network Management Configuration Guide

163
Static IP address assignment configuration example
Network requirements
As shown in Figure 99, the DHCP client (Router A) and the BOOTP client (Router B) obtain a static IP
address, DNS server address, gateway address, and other related parameters from the DHCP server
(Firewall).
The client ID of Ethernet 1/1 on Router A is:
3030-3066-2e65-3230-302e-3030-3032-2d45-7468-6572-6e65-7430-2f30.
The MAC address of Ethernet 1/1 on Router B is: 000f-e200-01c0.
Figure 99 Network diagram
Configuring Firewall
1. Specify IP addresses for interfaces and create security zones. (Details not shown.)
2. Enable DHCP:
a. From the navigation tree, select Network > DHCP > DHCP Server.
b. Select the Enable option for DHCP Service.
Router A
DHCP Client
DNS server
10.1.1.2/25
Firewall
DHCP server
GE0/1
10.1.1.1/25
Eth1/1
Gateway
10.1.1.126/25
Router B
BOOTP Client
Eth1/1