HP VPN Firewall Appliances Network Management Configuration Guide

166
Figure 102 Creating a static address pool
5. Enable the DHCP server on GigabitEthernet 0/1. With DHCP enabled, interfaces operate in the
DHCP server mode:
a. In the Interface Configuration field, click the icon next to GigabitEthernet 0/1.
b. On the DHCP Server Interface Config page, select the Enable option.
c. Click Apply.
Figure 103 Enabling DHCP server on interface GigabitEthernet 0/1
Verifying the configuration
Router A and Router B can obtain IP addresses 10.1.1.5 and 10.1.1.6 respectively, and other configuration
information from the DHCP server on Firewall. From the navigation tree, select Network > DHCP > DHCP
Server on Firewall and view the client IP address assigned by the DHCP server in Address in Use.
Dynamic IP address allocation configuration example
Network requirements
As shown in Figure 104, the DHCP server (Firewall) assigns IP address to clients on subnet 10.1.1.0/24,
w h i c h i s s u b n e t t e d i n t o 10 .1.1. 0 / 25 a n d 10 .1.1.12 8 / 25 .
The IP addresses of GigabitEthernet 0/1 and GigabitEthernet 0/2 on Firewall are 10.1.1.1/25 and
10 .1.1.12 9 / 25 r e s p e c t i v e l y.
Address pool 10.1.1.0/25 has the address lease duration ten days and twelve hours, domain name suffix
aabbcc.com, DNS server address 10.1.1.2/25, WINS server address 10.1.1.4/25, and gateway
address 10.1.1.126/25.