HP VPN Firewall Appliances Network Management Configuration Guide

170
Verifying the configuration
Clients in subnets 10.1.1.0/25 and 10.1.1.128/25 can obtain corresponding IP addresses and other
configuration information from the DHCP server Firewall. From the navigation tree, select Network >
DHCP > DHCP Server on Firewall and view the client IP address assigned by the DHCP server in Address
in Use.
Configuring the DHCP server at the CLI
DHCP server configuration task list
Task Remarks
Configuring an address pool on the DHCP server Required.
Enabling DHCP Required.
Enabling the DHCP server on an interfaceEnabling DHCP Required.
Applying an extended address pool on an interface
Required by the extended address pool
configuration.
When configuring a common address
pool, ignore this task.
Configuring the DHCP server security functions Optional.
Enabling client offline detection Optional.
Enabling handling of Option 82 Optional.
Specifying the threshold for sending trap messages Optional.
Configuring an address pool on the DHCP server
Configuration task list
Task Remarks
Creating a DHCP address pool Required.
Configuring address
allocation mode for a
common address pool
Configuring static address allocation
Required to configure either
of the two f
or the common
address pool configuration.
Configuring dynamic address allocation
Configuring dynamic address allocation for an extended address pool
Required for the extended
address pool configuration.
Configuring a domain name suffix for the client
Optional.
Configuring DNS servers for the client
Configuring WINS servers and NetBIOS node type for the client
Configuring BIMS server information for the client
Configuring gateways for the client
Configuring the TFTP server and bootfile name for the client