HP VPN Firewall Appliances Network Management Configuration Guide

193
The page for creating a static IP-to-MAC binding as shown in Figure 118 appears.
Figure 117 Displaying IP-to-MAC bindings
Figure 118 Creating a static IP-to-MAC binding
4. Configure clients' IP-to-MAC bindings as described in Table 29.
5. Click Apply.
Table 29 Configuration items
Item Descri
p
tion
IP Address Enter the IP address of a DHCP client.
MAC Address Enter the MAC address of the DHCP client.
Interface Name
Select the Layer 3 interface connected with the DHCP client.
IMPORTANT:
The interface of a static binding entry must be configured as a DHCP relay agent.
Otherwise, address entry conflicts might occur.
DHCP relay agent configuration example
Network requirements
Configure the DHCP relay agent on Firewall so that the clients can obtain IP addresses in subnet
10.10.1.0/24 and other configuration information from the DHCP server in another subnet.