HP VPN Firewall Appliances Network Management Configuration Guide

194
Figure 119 Network diagram
Configuring Firewall
You must also configure the DHCP server on Router. For more information about DHCP server
configuration, see "Configuring the DHCP server."
Because the DHCP relay agent and ser
ver are on different subnets, you need to configure static routing
or a dynamic routing protocol to make them reachable to each other.
1. Specify IP addresses for interfaces and create security zones. (Details not shown.)
2. Enable DHCP:
a. From the navigation tree, select Network > DHCP > DHCP Relay.
b. Select the Enable option in the DHCP Service field.
c. Click Apply.
Router
DHCP server
Firewall
DHCP relay
DHCP client DHCP client
DHCP clientDHCP client
GE0/2
10.1.1.2/24
GE0/1
10.10.1.1/24
Eth1/1
10.1.1.1/24