HP VPN Firewall Appliances Network Management Configuration Guide

195
Figure 120 Enabling the DHCP service
3. Configure a DHCP server group:
a. In the Server Group field, click Add.
b. Enter 1 for Server Group ID.
c. Enter 10.1.1.1 for IP Address.
d. Click Apply.
Figure 121 Creating a DHCP server group
4. Enable the DHCP relay agent on GigabitEthernet 0/1:
a. In the Interface Config field, click the icon of GigabitEthernet 0/1.
b. Select the Enable option in the DHCP Relay field.
c. Select 1 for Server Group ID.