HP VPN Firewall Appliances Network Management Configuration Guide

196
d. Click Apply.
Figure 122 Enabling DHCP relay agent on interface GigabitEthernet 0/1
After the preceding configuration is complete, DHCP clients can obtain IP addresses and other
configuration information from the DHCP server through the DHCP relay agent.
Configuring the DHCP relay agent at the CLI
DHCP relay agent configuration task list
Task Remarks
Enabling DHCP Required.
Enabling the DHCP relay agent on an interface Required.
Correlating a DHCP server group with a relay agent interface Required.
Configuring the DHCP relay agent security functions Optional.
Enabling client offline detection Optional.
Configuring the DHCP relay agent to release an IP address Optional.
Configuring the DHCP relay agent to handle Option 82 Optional.
Configuring the DHCP relay agent
Enabling DHCP
Enable DHCP to validate other DHCP relay agent settings.
To enable DHCP:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable DHCP.
dhcp enable Disabled by default.
Enabling the DHCP relay agent on an interface
With the DHCP relay agent enabled, an interface forwards incoming DHCP requests to a DHCP server
for address allocation.