HP VPN Firewall Appliances Network Management Configuration Guide

217
Figure 131 Creating a static domain name resolution entry
3. Type the name and IP address. (Each name corresponds to one IP address only. If you configure
multiple IP addresses for a host name, the one last configured takes effect.)
4. Click Apply.
Configuring dynamic domain name resolution
NOTE:
The device can revolve a maximum of four IP addresses for a domain name.
1. From the navigation tree, select Network > DNS > Dynamic.
The dynamic domain name resolution configuration page appears, as shown in Figure 132.
2. Select the Enable option for Dynamic DNS.
Figure 132 Dynamic domain name resolution configuration page
Configuring DNS proxy
1. From the navigation tree, select Network > DNS > Dynamic.
The dynamic domain name resolution configuration page appears, as shown in Figure 132.