HP VPN Firewall Appliances Network Management Configuration Guide

246
Creating a static ARP entry
1. From the navigation tree, select Firewall > ARP Management > ARP Table.
The ARP Table configuration page shown in Figure 160 appears.
2. Click Add.
The Ne
w Static ARP Entr
y page appears.
Figure 161 Adding a static ARP entry
3. Configure a static ARP entry as described in Table 31.
4. Click Apply.
Table 31 Configuration items
Item Descri
p
tion
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.
Advanced
Options
VLAN ID Enter a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
The VLAN ID must be the ID of an existing VLAN, and the port must belong to the
VLAN. The corresponding VLAN interface must also exist.
Port
VPN
Instance
Enter the name of the VPN instance to which the static ARP entry belongs.
Enabling dynamic ARP learning
1. From the navigation tree, select Firewall > ARP Management > Dynamic Entry.
The dynamic entry management page appears.