HP VPN Firewall Appliances Network Management Configuration Guide

8
Figure 6 Modifying interface GigabitEthernet 0/1
2. Change the operating mode of GigabitEthernet 0/2 into bridge.
The configuration here is the same as that for GigabitEthernet 0/1.
3. Create VLAN-interface 1:
By default, VLAN 1 exists, and all ports are untagged members of VLAN 1.
a. Click Add on the interface management page.
b. Set the interface name to Vlan-interface1, select Static Address for IP Config, enter IP address
1.1.2.1, and select 24 (255.255.255.255) as the network mask.
c. Click Apply.