HP VPN Firewall Appliances Network Management Configuration Guide

289
Item Descri
p
tion
Green
Discard Set the action to perform for conforming packets (green packets):
• Discard—Drops the packets.
• Pass—Permits the packets to pass through.
• Pass (Remark DSCP)—Sets a specific DSCP value for the packets and
permits the packets to pass through. With this option selected, you
must select a DSCP value.
By default, conforming packets are permitted to pass through.
Pass
Pass
(Remark
DSCP)
Remark
IP Precedence
Mark matching packets with the selected IP precedence.
Selecting Not Set disables the IP precedence marking action.
DSCP
Mark matching packets with the selected DSCP precedence.
Selecting Not Set disables the DSCP marking action.
Local Precedence
Mark matching packets with the selected local precedence.
Selecting Not Set disables local precedence marking.
This configuration item is not supported.
Dot1p
Mark matching packets with the selected 802.1p priority.
Selecting Not Set disables 802.1p priority marking.
Queue
Queue
Configure CBQ for packets.
If this box is not selected, FIFO schedules packets by
default.
These
configuration
items are not
supported. .
EF
EF Configure EF.
Max
Bandwidth
Configure the maximum bandwidth for EF.
CBS
Configure the CBS for EF when the Max Bandwidth
option is selected.
Percent Configure the percent of available bandwidth for EF.
CBS-Ratio
Configure the ratio of CBS to CIR for EF when the
Percent option is selected.
AF
AF Configure AF.
Max
Bandwidth
Configure the minimum guaranteed bandwidth for
AF.
Percent
Configure the percent of available bandwidth for
AF.
WFQ
Configure WFQ by entering the total number of fair
queues, which must equal two to the power of an
integer.
A traffic behavior configured with WFQ can only be
associated a system-defined class.
Filter
Configure the packet filtering action for data packets:
• Permit—Forwards the packet.
• Deny—Drops the packet.
• Not Set—Cancels the packet filtering action.