HP VPN Firewall Appliances Network Management Configuration Guide

293
• If the interface is a virtual interface, a tunnel interface for example, 0 kbps applies.
To set the port bandwidth limit:
1. Select Firewall > QoS > PortBandwidth from the navigation tree.
2. Click Setup to enter the page for configuring port bandwidth limit.
Figure 195 Port bandwidth
3. Configure the port bandwidth limit, as described in Table 37.
4. Click Apply.
Table 37 Configuration items
Item Descri
p
tion
Bandwidth Limit Enable or disable port bandwidth limit for selected ports.
Max Bandwidth
Set the maximum available port bandwidth.
HP recommends that you set the maximum available port bandwidth to be smaller
than the actual available bandwidth of the physical interface or logical link.
Interface Select the port or ports to be configured with port bandwidth limit in the port list.
Configuring a QoS policy at the CLI
Figure 196 shows how to configure a QoS policy.